TECHNICAL TAPE FOR METAL FABRICATION Tapes for metal to metal bonding to replace rivets and bolts.
The advantages are:
These tapes need very high strength, and high stiffness. They have to bond to a variety of surfaces including untreated metals, galvanized steel and powder coated metals.
-
Quick, clean and efficient in use
-
No perforation of the substrate
-
Can prevent galvanic corrosion
-
No significant H & S concerns
-
No drying time or hazardous fumes
Bonding tapes to replace rivets & screws
No need to drill holes.
Quicker joining process.
Anti-vibration & squeak.
Consistent bond along the length of the structure.
Creating a secure bond
Once in the correct position, the film liners are simply pulled out from between the strut and the backing sheet, immediately creating a secure bond.
Support strengthers applied
Support strengthers applied with tape ready to position onto backing sheet. Film liners pulled back ready for placement.
Support strut in position
Support strut in position with film liner being removed to create a secure bond.
Also acts as a 'third hand' if rivets are to be used a later part of the manufacturing process.
Bonding powder coated aluminium
Bonding powder coated aluminium - film liner enable accurate placement before exposing the adhesive.
FOR EXPERT ADVICE, FREE SAMPLES OR TO ORDER, CALL TECHNIBOND ON +44 1628 642800
CUSTOMER REVIEWS
SWIPE TO SEE MORE TESTIMONIALS
Frequently Asked Questions
We slit most of our products to order, so we have no standard roll width. If you want 13mm or 133mm, you can have it.
As a standard, the minimum is 6mm. We can slit most products narrower than this (we have slit down to 1.6mm) but we charge the same per roll as if it were 6mm, due to the increased slitting and packaging difficulty and the increased waste. The maximum width depends on the product, but is usually at least 1 metre.
We hold large quantities of bulk rolls in stock and manufacture to order. That's the only way we can offer the number of products and product variations that we do.
UK deliveries on rolls, 3 to 5 working days. Spools, pads and die-cuts are 10 working days. If your order is urgent, please speak to our sales department and we'll try to help. Export orders are subject to longer delivery times.
Our MOQ on most rolls is £100. On rolls of Techniflex and on other formats it is £200.
On UK orders over £200 delivery is free. On orders between £100 and £200 we add a small order charge of £20. We can arrange a.m. and courier deliveries for additional charges.
As our products are made to order, we cannot generally accept returns unless the goods are faulty.
We are proud to guarantee the quality and performance of all our products and will quickly provide a replacement or refund if they fail to meet our standards.
Yes, we export around the world. Currently we export to Europe, the Far East, Australia and the US.